Shower Screens

1.Prepare the Cleaning Solution: Mix a 1:1 solution of white vinegar and water in a spray bottle.

2.Apply the Solution: Spray the mixture onto the shower screen, focusing on stained areas.

3.Let It Sit: Allow the solution to work for 10-15 minutes to dissolve buildup.

4.Scrub Gently: Use a soft cloth or sponge to scrub away any remaining stains.

5.Rinse and Dry: Rinse with clean water and dry the screen to prevent water spots.

1.Gather Your Tools: Collect a drill, level, measuring tape, screwdriver, silicone gun, and mounting screws.

2.Mark Installation Points: Measure and mark where the brackets will go based on the screen’s specifications.

3.Drill Holes: Use a drill to create holes in the marked spots.

4.Install Mounting Brackets: Attach the brackets to the wall, ensuring they are level.

5.Secure the Shower Screen: Fix the screen to the brackets and apply silicone along the edges to seal.

1.Assess Your Space: Determine which type of shower screen suits your bathroom’s layout.

2.Consider Functional Needs: Decide if you prefer a sliding, pivot, or fixed door design.

3.Select Glass Thickness: Choose between 6mm to 10mm glass based on your budget and safety needs.

4.Pick the Glass Finish: Decide on clear, frosted, or tinted glass to match your bathroom style.

5.Balance Budget and Style: Weigh your choices to find the right balance between cost, durability, and appearance.

1.Inspect the Silicone Seals: Regularly check for any cracks or signs of wear in the silicone seals.

2.Reapply Silicone if Needed: If seals are damaged, use a silicone gun to reseal them.

3.Clean the Bottom Track: Keep the screen’s bottom track free from dirt to ensure proper drainage.

4.Apply Water Repellent: Use a water-repellent spray on the glass to enhance waterproofing.

5.Schedule Routine Maintenance: Perform a full waterproofing check every 6-12 months.

1.Gather Installation Tools: Collect a drill, screwdriver, level, measuring tape, and silicone gun.

2.Measure and Mark: Mark the mounting points along the bathtub edge, aligned with the screen dimensions.

3.Drill Mounting Holes: Drill holes at the marked points for the brackets.

4.Attach the Bath Shower Screen: Position the screen on the brackets, ensuring proper alignment.

5.Seal the Edges: Apply silicone along the joint between the screen and bathtub to prevent leaks.